LE 112

LP 101

• Mode of Operation: Maintained
• Input Voltage: 240V±10% - 50Hz
• Battery: Hi-Temp. Nickel Cadmium Battery
• Charging Current: 100mA (Nominal)
• Lamp Used: 10 x SMD LED
• Operation Temperature: 0°C to 60°C
• Charger: Fully Automatic Constant Current. Solid-State Electronics Provide High Reliability with Trickle Charge-Facility.
• Indication: Red L.E.D. “On” Indicates Charging. Equipped with Push Test-Switch to Simulate Power Failure.
• Backup Time: 3 Hours Duration.
• Construction: Injection Moulded Fire-Retardant ABS Polyester Casing with Side Knockout Cable Entry.
• Weight: EΩ 0.75kg 
• Compliance: Malaysia Standards MS-893, IP-20.
• Protection: Low-Voltage Cut-Off to Prevent Over-Discharge of Battery
• Sirim & JKR Approved 
• Warranty: 5 Years
• ***PRODUCT DO NOT COME WITH ORIGINAL BOX, LOOSE UNIT WILL PACK BY NORMAL BUBBLE WRAP & BOX***

• Mode of Operation: Non-Maintained
• Input Voltage: 240V±10% - 50Hz
• Battery: Hi-Temp. Nickel Cadmium Battery
• Charging Current: 100mA (Nominal)
• Lamp Used: 2.5 Watt SMD LED
• Operation Temperature: 0°C to 60°C
• Charger: Fully Automatic Constant Current. Solid-State Electronics Provide High Reliability with Trickle Charge-Facility.
• Indication: Red L.E.D. “On” Indicates Charging. Equipped with Push Test-Switch to Simulate Power Failure.
• Backup Time: 3 Hours Duration.
• Construction: Injection Moulded Fire-Retardant ABS Polyester Base with Side Knockout Cable Entry. Injection Moulded Fire-Retardant Polycarbonate Gear Tray & Acrylic Diffuser.
• Weight: EΩ 0.2kg 
• Compliance: Malaysia Standards MS-619, IP-20 Luminaire
• Protection: Low-Voltage Cut-Off to Prevent Over-Discharge of Battery
• Sirim & JKR Approved 
• Warranty: 5 Years
• ***PRODUCT DO NOT COME WITH ORIGINAL BOX, LOOSE UNIT WILL PACK BY NORMAL BUBBLE WRAP & BOX***

• Mode of Operation: Non-Maintained
• Input Voltage: 240V±10% - 50Hz
• Battery: Hi-Temp. Nickel Cadmium Battery
• Charging Current: 120mA (Nominal)
• Lamp Used: 3.0 Watt Power LED
• Operation Temperature: 0°C to 60°C
• Charger: Fully Automatic Constant Current. Solid-State Electronics Provide High Reliability with Trickle Charge-Facility.
• Indication: Red L.E.D. “On” Indicates Charging. Equipped with Push Test-Switch to Simulate Power Failure.
• Backup Time: 3 Hours Duration.
• Construction: Electro-Galvanished Steel Casing of High Reflectance Finished with Corrosion Resistant Epoxy Spray Coating.
• Weight: Ω 0.5kg
• Compliance: Malaysia Standards MS-619, IP-20 Luminaire
• Protection: Low-Voltage Cut-Off to Prevent Over-Discharge of Battery
• Sirim Approved 
• Warranty: 5 Years

• Mode of Operation: Non-Maintained
• Input Voltage: 240V±10% - 50Hz
• Battery: Hi-Temp. Nickel Cadmium Battery
• Charging Current: 120mA (Nominal)
• Lamp Used: 1.2 Watt SMD LED
• Operation Temperature: 0°C to 60°C
• Charger: Fully Automatic Constant Current. Solid-State Electronics Provide High Reliability with Trickle Charge-Facility.
• Indication: Red L.E.D. “On” Indicates Charging. Equipped with Push Test-Switch to Simulate Power Failure.
• Backup Time: 3 Hours Duration.
• Construction: Fire-Retardant Polycarbonate Housing.
• Weight: Ω 0.2kg
• Compliance: Malaysia Standards MS-619, IP-20 Luminaire
• Protection: Low-Voltage Cut-Off to Prevent Over-Discharge of Battery
• Sirim Approved 
• Warranty: 5 Years

LED-60